Author Topic: 2017 / 2018 Schedule and General Rules  (Read 646 times)

0 Members and 1 Guest are viewing this topic.

August 23, 2017, 09:41:22 PM

Offline ShoeStringRacing

  • Moderator
  • B-Main
  • *****
  • Posts: 321
  • Karma: 2
2017 / 2018 Schedule and General Rules
« on: August 23, 2017, 09:41:22 PM »
Aug 23, 2017

We are going to be kicking off our 2017/2018 season a few weeks with the season opener September 24th. Much stays the same as last season with a few minor changes. As our general rules were already pretty much in line with the Canadian On Road Nationals the changes are minimal. Our “Sportsman” class will disappear meaning that this year USGT will be in line with CONRC.

Our core classes remain 17.5 Stock Sedan, 1/12 scale pan car and USGT. Additional classes will be run based numbers. We will run F1 / Mini or VTA provided there are a minimum of 5 cars in attendance to register. One or all classes may be run if the numbers warrant the class inclusion for the event. It is up to you folks to bring the numbers if you want to run your F1 / Mini / Pan car / VTA.

We have ONE loaner car this year. Basic “beginner” car (TC3) and will be set up for USGT intended to let would be newbies get their feet wet. I will need a couple of RCO members to help support new RC racers as mentors and mechanical “Pit crew” help. One of the keys is to foster new participants and help promote our hobby. Renter entry will be $40.00 (Rental fee includes first car class entry) with proceeds going into ongoing maintenance of the rental program. Rental will need to be reserved at minimum 3 days prior to the event to ensure we have time to prep the kits.  I am always looking for spare batteries and electronic go parts, tires or even chassis, if you can help out please let me know.

Set-up will be done the evening before the event and practice time will be 8:00am to 10:00am Sunday morning depending on numbers we may begin racing earlier. Pack up of the track will begin immediately after the final main race, needless to say, the more bodies we have helping out the better for all of us.

For 2017 / 2018 again there will be no membership fee, and race day rates will stay the same as last year.

Race day rates:

First Class entry $25.00
Second / Third class $5.00 (each additional class)
Kids 16 and under $15.00 (Please note: Children 13 and under must be accompanied by and adult)

We will be doing 50/50 draws and raffles throughout the season on interesting prizes to help support continued maintenance of the track and timing hardware. Some of our timing hardware will need some repair / replacement this year so we do have specific goals in mind.

Maple Ridge Center canteen services on site will continue for this year. Check out our host facility on line as they have much to offer in the way of facility rental for non RC events as well.

Maple Ridge Center
12820 43 HWY E, Chesterville, ON
www.mapleridgecentre.com

Race day - Gates open at 8:00 am
Registration open 9:00am till 10:00am

2017 / 2018 Schedule:

September 24 – Season Opener
October 22
November 5
November 19
December 3
December 17
January 7
January 21
February 4
February 18
March  4 (To Be Confirmed)
March 18 (To Be Confirmed)
**Please Note: 2018 Canadian On Road Nationals schedule March 22nd - 25th
April 8
April 22
May 6 - Season Finale




RCO Basic Class Specifications:

Stock Touring Car - 17.5 Blinky

Chassis: Any 1/10 scale 4wd or Fwd touring car chassis – maximum track width of 190mm – Chassis must have four wheel independent suspension.
Motor: 17.5 ROAR Legal brushless – No D3.5 or NON-ROAR legal rotors – Timing is permitted
ESC: ROAR approved “Blinky mode” ESC
Weight: 1380 grams minimum
Tires: Any rubber 1/10 Touring car tire is permitted (ie Schumacher / Sorex type)
Ride Height: 5mm minimum
Battery: Any hard case 2S 7.4V nominal Lipo (Max allowable voltage 8.44V)
Body: Any Sedan style body on the ROAR T2 190mm Touring car approved list

1/12 Scale “Pan Car”

Chassis: Any RWD 1/12 scale pan car chassis – single one piece drive axle
Motor: 17.5 ROAR Legal – No D3.5 or NON-ROAR legal rotors – Timing is permitted
ECS: ROAR approved - Blinky mode
Weight: 730 Grams minimum
Tires: Any 1/12 scale foam tire
Ride Height: 3mm minimum
Battery: Any hard case 1S 3.7V nominal Lipo – Maximim voltage of 4.22V
Body: Any Can-AM / GTP / WSC body style

Canadian Vintage Trans Am (CVTA)

Chassis: Any 1/10 scale 4wd or Fwd touring car chassis – maximum track width of 190mm – Chassis must have four wheel independent suspension.
Motor: 21.5 ROAR legal – No D3.5 or non-ROAR legal rotors – Timing is permitted
ESC: ROAR approved “Blinky mode” ESC
Weight: 1450 grams minimum
Tires: CVTA Regulations - Front and rear specific – must maintain tread pattern (no slicks)
Ride Height: 5mm minimum
Battery: Any hard case 2S 7.4V nominal Lipo (Max allowable voltage 8.44V)
Body: CVTA Regulation – Driver model not required - Any car make and model that historically ran in Trans Am series (1960's - 70's) will be permitted provided it fits the chassis for the class.

Note: USVTA spec cars will be run within the CVTA cars as a single class

F1

Chassis: Any 1/10 scale F1 Chassis, RWD – Maximum wheelbase of 270mm
Motor: 21.5 ROAR legal – No D3.5 or non-ROAR legal rotors – Timing is permitted
ESC: ROAR approved “Blinky mode” ESC
Weight: 1050 grams minimum
Tires: Any Rubber F1 tire is permitted
Ride height: 3mm minimum
Battery: Any hard case 2S 7.4V nominal Lipo (Max allowable voltage 8.44V)
Body: F1 Lexan Body – Front and Rear wings must be rigid plastics (not Lexan) Tamiya type

Mini

Chassis : M03 / M04 / M05 or M06
Motor: 17.5 ROAR Legal brushless – No D3.5 or NON-ROAR legal rotors – Timing is permitted
Drivetrain: Only kit supplied internal gears – After market “High Speed” gears are not permitted
ESC: ROAR approved “Blinky mode” ESC
Weight: Not applicable
Tires: Tamiya 60D rubber tires – inserts only – non-oem rims are permitted only if the final mounted size is the same as a mounted Tamiya 60D tire and rim
Right Height: 5mm minimum
Battery: Any hard case 2S 7.4V nominal Lipo (Max allowable voltage 8.44V)
Body: Any body made to fit the M-chassis is permitted

USGT

(Note: VTA Spec cars will be permitted to run in USGT– If there is minimum of “5” VTA cars in attendance a full VTA be run as a full class)

Body Specifications: 190mm or 200mm bodies - It is highly preferred that bodies are detailed in a race type livery, real or imaginary - Any scale molded wing can be used - Lexan wings must not exceed a maximum height of 10mm including side dams.
Chassis: Any 1/10 scale, 4WD or FWD touring car chassis - Must have four wheel independent suspension - Any era or brand chassis is allowed.
Tire & Wheel: Spec. tire = Ride USGT Spec Tire RIE24025. - Tires (set of 4) available through Great Hobbies or Gravity RC with part numbers - SKU GRC124 (pre-mount), SKU GRC125 (tires only) - No grinding of tread, except for the ridge formed from the production mold - Any 24mm to 26mm spoked (non dish) rim is permitted.
Motor: 21.5 brushless: Any ROAR Approved 21.5 brushless motor - Motor timing advance is allowed - 12.51 mm rotor diameter maximum - There is no FDR (gear ratio) limit for this class.
ESC: "blinky" mode must be used - No "Boost" or "Turbo" is allowed
Battery: Any hard cased 2s, 7.4v nominal LiPo - must not exceed a maximum of 8.40v.
Ride Height: Minimum ride height is 5mm.
Weight: Four Wheel Drive (4WD) chassis (USGT) = Minimum 1380g in USGT race-ready trim - Front Wheel Drive (FWD) chassis = No Minimum weight

IMPORTANT: “Spirit of Competition”

If it is not in the rules and does not encompass the spirit of controlled RC racing with realistic scale looking cars consider it illegal. The intent is to provide a level playing field and put the emphasis on “Fun friendly competition” Regarding TECH - we will be running on the honor system with each driver responsible for ensuring that their car is legal under the “RCO Basic Class Specification” with top three finishers in each main must be willing to submit their RC racer for a quick inspection should there be a protest from the run group. An inspection / self tech table will be provided for all participants to use at any time with the basic regulations posted for quick reference. Minimum Ride Heights are required to protect the running surface – the carpet is expensive and we want to keep it in good order for many years to come. Always use common sense and safety precautions when charging battery packs and please respect the facility we are fortunate to be permitted to use.

The focus of the OORRCR is to provide a fun place to enjoy the scale on road racing hobby!  :)

See you all in September! 8)
« Last Edit: November 03, 2017, 10:28:09 AM by ShoeStringRacing »

August 23, 2017, 10:17:18 PMReply #1

Offline teamHTW

  • C-Main
  • ***
  • Posts: 83
  • Karma: 0
Re: 2017 / 2018 Schedule !!!
« Reply #1 on: August 23, 2017, 10:17:18 PM »
Can't wait !!
« Last Edit: August 23, 2017, 10:23:48 PM by teamHTW »

August 24, 2017, 12:09:22 AMReply #2

Online VanBee

  • C-Main
  • ***
  • Posts: 81
  • Karma: 0
Re: 2017 / 2018 Schedule !!!
« Reply #2 on: August 24, 2017, 12:09:22 AM »
This is fantastic!  ;D ;D ;D

Looking forward to it.
TC7.1
12R5.2

August 24, 2017, 07:14:09 AMReply #3

Offline TKG26

  • Joel
  • Forum Admin
  • Prestige A-main Winner
  • *****
  • Posts: 10087
  • Karma: 39
    • R/C OTTAWA
Re: 2017 / 2018 Schedule !!!
« Reply #3 on: August 24, 2017, 07:14:09 AM »
Great news


Sent from my iPhone using Tapatalk
HOBBYWING | MIP | GREATHOBBIES
DIRT TRAX 3.0
**RIP PAUL DACK**

August 24, 2017, 09:08:43 PMReply #4

Offline A.I.

  • D-Main
  • **
  • Posts: 49
  • Karma: 0
Re: 2017 / 2018 Schedule !!!
« Reply #4 on: August 24, 2017, 09:08:43 PM »
Amazing.

I'll be bringing my F1 car to the track in case we ever get enough people.

Thanks Guy!

August 28, 2017, 11:21:40 AMReply #5

Offline Netcruzer

  • B-Main
  • ****
  • Posts: 179
  • Karma: 0
    • My YouTube Channel
Re: 2017 / 2018 Schedule !!!
« Reply #5 on: August 28, 2017, 11:21:40 AM »
Can you clarify the sportsman wing and tire rules for this year?  The wing mention is still there but the sportsman weight and open tire statement is gone.
Just trying to figure out if I MUST buy USGT tread tires, and if the wing must be under 10mm, no exceptions even if car is 1450g?
racing: CAT K1 Aero 4WD, Slash 4x4 SC, Typhon E-buggy, DETC410 TC
bashing: Cheetah 4x4, Slash 4x4, Summit 4x4, 4-TEC 2.0
vintage: TRX Pro Blue Eagle LSII, TRX 4-TEC electric

Do you like RC, Tech, and Cars? - Subscribe and help grow my YouTube Channel:
https://www.youtube.com/Netcruzer

August 28, 2017, 11:51:31 AMReply #6

Online SteveM

  • A-Main Winner
  • *****
  • Posts: 1842
  • Karma: 47
Re: 2017 / 2018 Schedule !!!
« Reply #6 on: August 28, 2017, 11:51:31 AM »
Can you clarify the sportsman wing and tire rules for this year?  The wing mention is still there but the sportsman weight and open tire statement is gone.
Just trying to figure out if I MUST buy USGT tread tires, and if the wing must be under 10mm, no exceptions even if car is 1450g?

There is NO SPORTSMAN class this year.

If you want to run a 21.5T sedan then you must run the USGT class with the specific tire, body and rear wing rules, or run the CVTA class also with specific tire, body and rear wing rules.

August 29, 2017, 12:58:27 PMReply #7

Offline ShoeStringRacing

  • Moderator
  • B-Main
  • *****
  • Posts: 321
  • Karma: 2
Re: 2017 / 2018 Schedule !!!
« Reply #7 on: August 29, 2017, 12:58:27 PM »
Quote
Quote from: Netcruzer on August 28, 2017, 11:21:40 AM
Can you clarify the sportsman wing and tire rules for this year?  The wing mention is still there but the sportsman weight and open tire statement is gone.
Just trying to figure out if I MUST buy USGT tread tires, and if the wing must be under 10mm, no exceptions even if car is 1450g?

There is NO SPORTSMAN class this year.

If you want to run a 21.5T sedan then you must run the USGT class with the specific tire, body and rear wing rules, or run the CVTA class also with specific tire, body and rear wing rules.

Sorry.. my bad, I thought I had deleted all sportsman references....... Thanks SteveM

August 29, 2017, 08:26:54 PMReply #8

Offline maximebeauvais

  • A-Main Winner
  • *****
  • Posts: 2299
  • Karma: 3
Re: 2017 / 2018 Schedule !!!
« Reply #8 on: August 29, 2017, 08:26:54 PM »

USGT

(Note: VTA Spec cars will be permitted to run in USGT– If there is minimum of “5” VTA cars in attendance a full VTA be run as a full class)

Body Specifications: 190mm or 200mm bodies - It is highly preferred that bodies are detailed in a race type livery, real or imaginary - Any scale molded wing can be used - Lexan wings must not exceed a maximum height of 10mm including side dams.
Chassis: Any 1/10 scale, 4WD or FWD touring car chassis - Must have four wheel independent suspension - Any era or brand chassis is allowed.
Tire & Wheel: Spec. tire = Ride USGT Spec Tire RIE24025. - Tires (set of 4) available through Great Hobbies or Gravity RC with part numbers - SKU GRC124 (pre-mount), SKU GRC125 (tires only) - No grinding of tread, except for the ridge formed from the production mold - Any 24mm to 26mm spoked (non dish) rim is permitted.
Motor: 21.5 brushless: Any Approved 21.5 brushless motor - Motor timing advance is allowed - 12.51 mm rotor diameter maximum - There is no FDR (gear ratio) limit for this class.
ESC: "blinky" mode must be used - No "Boost" or "Turbo" is allowed
Battery: Any hard cased 2s, 7.4v nominal LiPo - must not exceed a maximum of 8.40v.
Ride Height: Minimum ride height is 5mm.
Weight: Four Wheel Drive (4WD) chassis (USGT) = Minimum 1380g in USGT race-ready trim - Front Wheel Drive (FWD) chassis = No Minimum weight


could you please specify ''any approved 21.5 brushless motor''

thanks

August 29, 2017, 09:01:25 PMReply #9

Offline ShoeStringRacing

  • Moderator
  • B-Main
  • *****
  • Posts: 321
  • Karma: 2
Re: 2017 / 2018 Schedule !!!
« Reply #9 on: August 29, 2017, 09:01:25 PM »
Quote
« Reply #8 on: Today at 08:26:54 PM »
QuoteModifyRemoveSplit Topic
Quote from: ShoeStringRacing on August 23, 2017, 09:41:22 PM

USGT

(Note: VTA Spec cars will be permitted to run in USGT– If there is minimum of “5” VTA cars in attendance a full VTA be run as a full class)

Body Specifications: 190mm or 200mm bodies - It is highly preferred that bodies are detailed in a race type livery, real or imaginary - Any scale molded wing can be used - Lexan wings must not exceed a maximum height of 10mm including side dams.
Chassis: Any 1/10 scale, 4WD or FWD touring car chassis - Must have four wheel independent suspension - Any era or brand chassis is allowed.
Tire & Wheel: Spec. tire = Ride USGT Spec Tire RIE24025. - Tires (set of 4) available through Great Hobbies or Gravity RC with part numbers - SKU GRC124 (pre-mount), SKU GRC125 (tires only) - No grinding of tread, except for the ridge formed from the production mold - Any 24mm to 26mm spoked (non dish) rim is permitted.
Motor: 21.5 brushless: Any Approved 21.5 brushless motor - Motor timing advance is allowed - 12.51 mm rotor diameter maximum - There is no FDR (gear ratio) limit for this class.
ESC: "blinky" mode must be used - No "Boost" or "Turbo" is allowed
Battery: Any hard cased 2s, 7.4v nominal LiPo - must not exceed a maximum of 8.40v.
Ride Height: Minimum ride height is 5mm.
Weight: Four Wheel Drive (4WD) chassis (USGT) = Minimum 1380g in USGT race-ready trim - Front Wheel Drive (FWD) chassis = No Minimum weight


could you please specify ''any approved 21.5 brushless motor''

thanks

ROAR Approved.....

August 29, 2017, 10:03:54 PMReply #10

Online DanL

  • A-Main Winner
  • *****
  • Posts: 1713
  • Karma: 13
Re: 2017 / 2018 Schedule !!!
« Reply #10 on: August 29, 2017, 10:03:54 PM »
Here is the link to the Roar Approved Motor list you will have to page down some to get to the stock 21.5t motors

http://www.roarracing.com/approvals/print_brushlessmotors.php
« Last Edit: August 30, 2017, 08:40:44 AM by DanL »

August 30, 2017, 08:22:40 AMReply #11

Offline ShoeStringRacing

  • Moderator
  • B-Main
  • *****
  • Posts: 321
  • Karma: 2
Re: 2017 / 2018 Schedule !!!
« Reply #11 on: August 30, 2017, 08:22:40 AM »
Quote
Here is the link to the Roar Approved Motor list you will have to page down some to get to the st::ock 21.5t motors

http://www.roarracing.com/approvals/print_brushlessmotors.php

Thanks Dan!

G

August 30, 2017, 12:12:14 PMReply #12

Offline maximebeauvais

  • A-Main Winner
  • *****
  • Posts: 2299
  • Karma: 3
Re: 2017 / 2018 Schedule and General Rules
« Reply #12 on: August 30, 2017, 12:12:14 PM »
Thanks !

September 03, 2017, 12:23:05 PMReply #13

Online VanBee

  • C-Main
  • ***
  • Posts: 81
  • Karma: 0
Re: 2017 / 2018 Schedule and General Rules
« Reply #13 on: September 03, 2017, 12:23:05 PM »
Noticed the Cdn. Nats dates were posted on their website.
http://www.conrc.com/
TC7.1
12R5.2

October 23, 2017, 03:08:17 AMReply #14

Offline Marc Gill

  • D-Main
  • **
  • Posts: 15
  • Karma: 0
Re: 2017 / 2018 Schedule and General Rules
« Reply #14 on: October 23, 2017, 03:08:17 AM »
Was reading your mini rules/guidelines what is the gearing rule for M07 as they have slightly different gear ratio even with 20T pinion max on M05/6 chassis. And 17.5 blinky any wb restrictions I like my 225mm medium wb.
Marc